View 74LV244D_19308.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74LV244 Octal buffer/line driver (3-State)
Product specification Supersedes data of 1997 Feb 19 IC24 Data Handbook 1998 May 20
Philips Semiconductors
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
FEATURES
* Wide operating voltage: 1.0 to 5.5 V * Optimized for low voltage applications: 1.0 to 3.6 V * Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V * Typical VOLP (output ground bounce) < 0.8 V at VCC = 3.3 V, * Typical VOHV (output VOH undershoot) > 2 V at VCC = 3.3 V, * Output capability: bus driver * ICC category: MSI
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25C; tr = tf 2.5 ns SYMBOL tPHL/tPLH CI CPD PARAMETER Propagation delay 1An to 1Yn; 2An to 2Yn Input capacitance Power dissipation capacitance per buffer Tamb = 25C Tamb = 25C
DESCRIPTION
The 74LV244 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT244. The 74LV244 is an octal non-inverting buffer/line driver with 3-State outputs. The 3-State outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state. The 74LV244 is identical to the 74LV240 but has non-inverting outputs.
CONDITIONS CL = 15 pF; VCC = 3.3 V
TYPICAL 8.0 3.5
UNIT ns pF pF
VCC = 3.3 V VI = GND to VCC1
35
NOTE: 1. CPD is used to determine the dynamic power dissipation (PD in W) VCC2 fi ) (CL VCC2 fo) where: PD = CPD fi = input frequency in MHz; CL = output load capacitance in pF; fo = output frequency in MHz; VCC = supply voltage in V; VCC2 fo) = sum of the outputs. (CL
ORDERING INFORMATION
PACKAGES 20-Pin Plastic DIL 20-Pin Plastic SO 20-Pin Plastic SSOP Type II 20-Pin Plastic TSSOP Type I TEMPERATURE RANGE -40C to +125C -40C to +125C -40C to +125C -40C to +125C OUTSIDE NORTH AMERICA 74LV244 N 74LV244 D 74LV244 DB 74LV244 PW NORTH AMERICA 74LV244 N 74LV244 D 74LV244 DB 74LV244PW DH PKG. DWG. # SOT146-1 SOT163-1 SOT339-1 SOT360-1
PIN CONFIGURATION
1OE 1A0 2Y0 1A1 2Y1 1A2 2Y2 1A3 2Y3 GND 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 VCC 2OE 1Y0 2A0 1Y1 2A1 1Y2 2A2 1Y3 2A3
LOGIC SYMBOL
2 1A0 17 2A0 4 1A1 15 2A1 6 1A2 13 2A2 8 1A3 11 2A3 1 1OE 19 2OE 1Y0 18 2Y0 3 1Y1 16 2Y1 5 1Y2 14 2Y2 7 1Y3 12 2Y3 9
SV00621
SV00620
1998 May 20
2
853-1924 19420
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
PIN DESCRIPTION
PIN NUMBER 1 2, 4, 6, 8 3, 5, 7, 9 10 17, 15, 13, 11 18, 16, 14, 12 19 20 SYMBOL 1OE 1A0 to 1A3 2Y0 to 2Y3 GND 2A0 to 2A3 1Y0 to 1Y3 2OE VCC FUNCTION Output enable input (active LOW) Data inputs Bus outputs
FUNCTIONAL DIAGRAM
2 4 6 8 1A0 1A1 1A2 1A3 1OE 2A0 2A1 2A2 2A3 2OE 2Y0 2Y1 2Y2 2Y3 3 5 7 9 1Y0 1Y1 1Y2 1Y3 18 16 14 12
Ground (0 V) Data inputs Bus outputs Output enable input (active LOW) Positive supply voltage
13 11 19 1 17 15
LOGIC SYMBOL (IEEE/IEC)
1 EN 18 16 14 12
2 4 6 8
SV00622
FUNCTION TABLE
INPUTS nOE nAn L H X OUTPUT nYn L H Z
19
EN 9 7 5 3
L L H
11 13 15 17
SV00666
NOTES: H = HIGH voltage level L = LOW voltage level X = don't care Z = high impedance OFF-state
1998 May 20
3
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC VI VO Tamb PARAMETER DC supply voltage Input voltage Output voltage Operating ambient temperature range in free air See DC and AC characteristics VCC = 1.0V to 2.0V VCC = 2.0V to 2.7V VCC = 2.7V to 3.6V VCC = 3.6V to 5.5V CONDITIONS See Note 1 MIN 1.0 0 0 -40 -40 - - - - - - - - TYP 3.3 - - MAX 5.5 VCC VCC +85 +125 500 200 100 50 UNIT V V V C
tr, tf
Input rise and fall times
ns/V
NOTE: 1. The LV is guaranteed to function down to VCC = 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC = 5.5V.
ABSOLUTE MAXIMUM RATINGS1, 2
In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to GND (ground = 0V). SYMBOL VCC "IIK "IOK "IO "IGND, "ICC Tstg PARAMETER DC supply voltage DC input diode current DC output diode current DC output source or sink current - bus driver outputs DC VCC or GND current for types with - bus driver outputs Storage temperature range Power dissipation per package - plastic DIL - plastic mini-pack (SO) - plastic shrink mini-pack (SSOP and TSSOP) for temperature range: -40 to +125C above +70C derate linearly with 12 mW/K above +70C derate linearly with 8 mW/K above +60C derate linearly with 5.5 mW/K VI < -0.5 or VI > VCC + 0.5V VO < -0.5 or VO > VCC + 0.5V -0.5V < VO < VCC + 0.5V CONDITIONS RATING -0.5 to +7.0 20 50 35 UNIT V mA mA mA
70 -65 to +150 750 500 400
mA C
PTOT
mW
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
1998 May 20
4
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions. Voltages are referenced to GND (ground = 0V). LIMITS SYMBOL PARAMETER TEST CONDITIONS MIN VCC = 1.2V VIH HIGH level Input voltage VCC = 2.0V VCC = 2.7 to 3.6V VCC = 4.5 to 5.5V VCC = 1.2V VIL LOW level Input voltage VCC = 2.0V VCC = 2.7 to 3.6V VCC = 4.5 to 5.5 VCC = 1.2V; VI = VIH or VIL; -IO = 100A VCC = 2.0V; VI = VIH or VIL; -IO = 100A VOH HIGH l level output ltt voltage out uts voltage; all outputs VCC = 2.7V; VI = VIH or VIL; -IO = 100A VCC = 3.0V; VI = VIH or VIL; -IO = 100A VCC = 4.5V; VI = VIH or VIL; -IO = 100A VO OH HIGH level output voltage; BUS driver outputs VCC = 3.0V; VI = VIH or VIL; -IO = 8mA VCC = 4.5V; VI = VIH or VIL; -IO = 16mA VCC = 1.2V; VI = VIH or VIL; IO = 100A VCC = 2.0V; VI = VIH or VIL; IO = 100A VOL LOW l level output ltt voltage out uts voltage; all outputs VCC = 2.7V; VI = VIH or VIL; IO = 100A VCC = 3.0V; VI = VIH or VIL; IO = 100A VCC = 4.5V; VI = VIH or VIL; IO = 100A VO OL II IOZ ICC ICC LOW level output voltage; BUS driver outputs Input leakage current 3-State output OFF-state current Quiescent supply current; MSI Additional quiescent supply current per input VCC = 3.0V; VI = VIH or VIL; IO = 8mA VCC = 4.5V; VI = VIH or VIL; IO = 16mA VCC = 5.5V; VI = VCC or GND VCC = 3.6V; VI = VIH or VIL; VO = VCC or GND VCC = 5.5V; VI = VCC or GND; IO = 0 VCC = 2.7V to 3.6V; VI = VCC - 0.6V 1.8 2.5 2.8 4.3 2.40 3.60 1.2 2.0 2.7 3.0 4.5 2.82 4.20 0 0 0 0 0 0.25 0.35 0.2 0.2 0.2 0.2 0.40 0.55 1.0 5 20.0 500 0.2 0.2 0.2 0.2 0.50 V 0.65 1.0 10 160 850 A A A A V 1.8 2.5 2.8 4.3 2.20 V 3.50 V 0.9 1.4 2.0 0.7NOTE: 1. All typical values are measured at Tamb = 25C.
1998 May 20
5
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
AC CHARACTERISTICS
GND = 0V; tr = tf 2.5ns; CL = 50pF; RL =1K LIMITS CONDITION SYMBOL PARAMETER WAVEFORM VCC(V) 1.2 Pro agation Propagation delay 1An to 1Yn; 2An to 2Yn 2.0 Figures 1, 2 2.7 3.0 to 3.6 4.5 to 5.5 1.2 3-State out ut enable time output 1OE to 1Yn; 2OE to 2Yn 2.0 Figures 2, 3 2.7 3.0 to 3.6 4.5 to 5.5 1.2 3-State out ut disable time output 1OE to 1Yn; 2OE to 2Yn 2.0 Figures 2, 3 2.7 3.0 to 3.6 4.5 to 5.5 NOTES: 1. Unless otherwise stated, all typical values are measured at Tamb = 25C. 2. Typical values are measured at VCC = 3.3 V. 60 22 17 132 34 24 21 16 43 32 26 19 ns 65 22 16 122 39 29 23 19 49 36 29 24 ns MIN -40 to +85 C TYP1 50 17 13 92 24 17 14 12 31 23 18 15 ns MAX -40 to +125 C MIN MAX UNIT
tPHL/tPLH
tPZH/tPZL
tPHZ/tPLZ
AC WAVEFORMS
VM = 1.5 V at VCC 2.7 V and 3.6 V VM = 0.5 x VCC at VCC < 2.7 V and 4.5 V VOL and VOH are the typical output voltage drop that occur with the output load. VX = VOL + 0.3 V at VCC 2.7 V and 3.6 V VX = VOL + 0.1 x VCC at VCC < 2.7 V and 4.5 V VY = VOH - 0.3 V at VCC 2.7V and 3.6 V VY = VOH - 0.1 x VCC at VCC < 2.7 V and 4.5 V
VI 1An, 2An INPUTS GND tPHL VOH 1Yn, 2Yn OUTPUT VOL VM tPLH VM VOH Qn OUTPUT HIGH-to-OFF OFF-to-HIGH GND outputs enabled VY VM outputs disabled outputs enabled VI OE INPUT GND VCC Qn OUTPUT LOW-to-OFF OFF-to-LOW VOL tPHZ tPLZ tPZL VM VX tPZH VM
SV00623 SV00617
Figure 2. 3-State enable and disable times.
Figure 1. Input (1An, 2An) to output (1Yn, 2Yn) propagation delays.
1998 May 20
6
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
TEST CIRCUIT
VCC 2 * VCC Open GND VO D.U.T. RT CL 50 pF RL = 1k RL = 1k
VI PULSE GENERATOR
Test Circuit for Outputs DEFINITIONS
RL = Load resistor CL = Load capacitance includes jig and probe capacitiance. RT = Termination resistance should be equal to ZOUT of pulse generators.
SWITCH POSITION
TEST tPLH/tPHL tPLZ/tPZL tPHZ/tPZH S1 Open 2 * VCC GND VCC < 2.7V 2.7-3.6V w 4.5V VI VCC 2.7V VCC
SV00896
Figure 3. Load circuitry for switching times.
1998 May 20
7
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
DIP20: plastic dual in-line package; 20 leads (300 mil)
SOT146-1
1998 May 20
8
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
SO20: plastic small outline package; 20 leads; body width 7.5 mm
SOT163-1
1998 May 20
9
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm
SOT339-1
1998 May 20
10
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm
SOT360-1
1998 May 20
11
Philips Semiconductors
Product specification
Octal buffer/line driver (3-State)
74LV244
DEFINITIONS
Data Sheet Identification
Objective Specification
Product Status
Formative or in Design
Definition
This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.
Preliminary Specification
Preproduction Product
Product Specification
Full Production
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 05-96 9397-750-04437
Philips Semiconductors
1998 May 20 12

▲Up To Search▲

Price & Availability of 74LV244D

	To Download 74LV244D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .